INTEGRATED STEPPER MOTORS - CONTROLLER, DRIVER, ENCODER, etc.
Integrated Motor Controller+Driver+Encoder/ SilverPak 17CE
- NEMA 17, 1.8º Bipolar Step Motor
- Operates from +12 to 40 VDC
- Phase current ranges from 0.1 to 2.0 Amps Peak
- Step Resolutions of 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
- Two Digital I/O's and two dedicated Inputs
- Execution Halt Pending a Switch
- Pre-wired for Opto Switch Inputs
- Homes to an Opto Sensor
- Fully programmable ramps and speeds
- Software selectable Hold and Move currents
- Stand Alone Operation with no connection to PC
- Stores up to 16 different programs at once with 4 kBytes of memory
- Up to 0,7 Nm of Holding Torque
Request Quote
Integrated Motor+Driver/ SilverPak 17D
- NEMA 17, 1.8º Bipolar Step Motor
- Operates from +12 to 24 VDC
- Up to 0,7 Nm of Holding Torque
- Phase current ranges from 0.25 to 2.0 Amps Peak
- Step Resolutions from Full, 2x, 4x, 8x
- Optically isolated Step, Direction,
and Disable/Enable Inputs
- Selectable Current Reduction of 33%
- Low Power Dissipation
- Efficient Current Control
- Thermal Shutdown, Under-voltage Protection
- 3 stack lengths available
Request Quote
Integrated Motor Controller+Driver/ SilverPak 17C
- NEMA 17, 1.8º Bipolar Step Motor
- Operates from +12 to 40 VDC
- Phase current ranges from 0.1 to 2.0 Amps Peak
- Step Resolutions of 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
- Two Digital I/O's and two dedicated Inputs
- Execution Halt Pending a Switch
- Pre-wired for Opto Switch Inputs
- Homes to an Opto Sensor
- Fully programmable ramps and speeds
- Software selectable Hold and Move currents
- Stand Alone Operation with no connection to PC
- Stores up to 16 different programs at once with 4 kBytes of memory
- Up to 0,7 Nm of Holding Torque
Request Quote
Integrated Motor+Controller+StallGuard/ SilverPak 17T
- Integrated Bipolar 1.8° Step Motor with Driver/Controller
- NEMA Size 17 Frame
- Holding Torque of up to 0,7Nm
- Input voltage of +7 to 28 VDC
- Output currents of 0.1 to 1.5 Amps Peak
- Step resolution of full step, 2x, 4x, 8x, and 16x microstepping
- Maximum speed of 250 kHz
- Up to 16 MHz of Step Clock Frequency
- Two digital limit switches, left and right
- One general purpose input (digital or analog)
- One open collector output capable of outputting 100mA
- Low power dissipation – no heat sink required
- Stand alone operating with no connection to PC
- Incorporated with TMCL Programming Language
- Up to 16 kBytes of Memory (2048 TMCL commands)
- Programmable settings for acceleration and velocity profiles
- Control commands such as Jump and Subroutines available
- Calculation and compare commands implemented
- StallGuard™ feature available
- – capable of detecting a stall without encoder
- RS485 communication
- 3 stack lengths available
Request Quote
Integrated Motor+Driver/ SilverPak 23D
- Operates from +12 to 48 VDC with certain currents*
- Selectable phase currents from 0.3 to 3.0 Amps Peak with certain voltages*
- Step resolutions from half step to 256x microstepping
- Four selectable damping modes
- Smooth motion
- Three optically isolated control inputs and one optically isolated control output
- Hold current reduction capability with adjustble current and timeout setting
- Pole Damping™ Technology
- * Please refer to Electrical Specs section for further details
Request Quote
Integrated Motor+Driver+Encoder/ SilverPak 23DE
- Operates from +12 to 48 VDC with certain currents*
- Selectable phase currents from 0.3 to 3.0 Amps Peak with certain voltages*
- Step resolutions from half step to 256x microstepping
- Four selectable damping modes
- Smooth motion
- Three optically isolated control inputs and one optically isolated control output
- Hold current reduction capability with adjustble current and timeout setting
- Pole Damping™ Technology
- On Board Encoder
- * Please refer to Electrical Specs section for further details
Request Quote
Integrated Motor+Controller/ SilverPak 23C
- NEMA 23, 1.8° Bipolar Step Motor
- Up to 2 Nm of holding torque
- Input voltage of +12 to 40 VDC
- Phase current ranges from 0.3 to of 3.0 Amps Peak
- Microstepping capabilities of 2x, 4x, 8x, 16x, 32x, 64x, 128x, 256x
- RS485 communication with optional converter cards available
- 4 user configurable digital I/O’s
- 2 dedicated inputs:
- 1 optical sensor for homing
- 1 switch closure to ground
- Fully programmable ramps and speeds
- Software selectable Hold and Move currents
- Stand Alone Operation with no connection to PC
- Stores up to 16 different programs at once with 4 kBytes of memory
- 3 stack lengths available
Request Quote
Integrated Motor+Controller+Encoder/ SilverPak 23CE
- NEMA 23, 1.8° Bipolar Step Motor
- Up to 2 Nm of holding torque
- Input voltage of +12 to 40 VDC
- Phase current ranges from 0.3 to of 3.0 Amps Peak
- Microstepping capabilities of 2x, 4x, 8x, 16x, 32x, 64x, 128x, 256x
- RS485 communication with optional converter cards available
- 4 user configurable digital I/O’s
- 2 dedicated inputs:
- 1 optical sensor for homing
- 1 switch closure to ground
- Fully programmable ramps and speeds
- Software selectable Hold and Move currents
- Stand Alone Operation with no connection to PC
- Stores up to 16 different programs at once with 4 kBytes of memory
- 3 stack lengths available
Request Quote
